External Rubber Speed Hump For Safety

Overview

The External Rubber Speed Hump for Safety is a proven traffic calming solution designed to reduce vehicle speeds in urban, residential, and industrial areas, enhancing safety for pedestrians, cyclists, and motorists alike. Constructed from 100% recycled rubber with a reinforced steel core, this speed hump offers exceptional durability and impact resistance, capable of withstanding heavy traffic while minimizing noise and vehicle stress. The classic trapezoidal design (150mm height, 12° slope) ensures a smooth experience, compliant with international traffic calming standards, and the black base with yellow reflective strips provides high visibility in all lighting conditions.

Features

Reinforced Recycled Rubber: Combines sustainability with strength, using post-consumer tire rubber and a steel mesh core to support loads up to 30 tons, ideal for trucks and emergency vehicles.

Optimal Traffic Calming Design: The 3.6-meter standard length covers two lanes, with a 150mm height that effectively reduces speeds to 20-30km/h without causing vehicle damage.

All-Weather Visibility: Pre-applied 3M reflective strips on both sides and the top surface ensure visibility from 200+ meters at night, meeting ANSI and EN 1317 standards.

Easy Installation: Comes in 900mm modular sections with pre-drilled holes, installable on asphalt or concrete using anchor bolts (included) in under 30 minutes per section.

Low Maintenance: The rubber surface is resistant to oil, grease, and de-icing salts, requiring only occasional cleaning to remove debris.

Application

Residential Streets: Protects children and pets by slowing traffic in neighborhoods, school zones, and park areas.

Commercial Districts: Controls speeds in shopping center parking lots, loading docks, and pedestrian-heavy retail zones.

Industrial Facilities: Manages vehicle speeds in warehouse complexes, factory entrances, and logistics yards, reducing accidents involving forklifts or delivery trucks.

Municipal Roads: Installed in downtown areas, bus stops, or crosswalks to prioritize pedestrian safety and comply with traffic regulations.

FAQ

Q: What is the recommended distance between speed humps?

A: For residential areas, 150-200 meters between humps ensures effective speed reduction without causing driver frustration.

Q: Can it be cut to a shorter length for narrow roads?

A: Yes, use a circular saw to trim sections to the desired length (minimum 500mm), with reflective strips available for custom-cut edges.

Q: How does it affect emergency vehicle response times?

A: The design allows emergency vehicles to pass safely at 30-40km/h without significant delay, balancing safety and accessibility.

Q: Is the rubber surface compliant with ADA accessibility standards?

A: Yes, the 12° slope and smooth transition meet ADA requirements for wheelchair and mobility device accessibility.