English
| Size: | |
|---|---|
| Weight: | |
| End cap size: | |
| End weight: | |
| Quantity: | |
RX-JSD-5R-05
RONGXIANG
The 500mm Rubber Speed Ramp with Yellow Reflective Part is a low-profile traffic calming solution designed to guide vehicles smoothly over obstacles or into parking bays while ensuring safety in low-speed environments. Constructed from recycled rubber with a 50mm height and yellow reflective top strip, this ramp reduces tripping hazards for pedestrians and protects vehicle suspension from sudden impacts. The 500mm length fits single lanes or narrow driveways, making it ideal for residential areas, parking lots, and commercial entrances.
Recycled Rubber Construction: Made from 80% post-consumer tire rubber, the ramp is eco-friendly, oil-resistant, and capable of withstanding 10-ton vehicle loads.
Low-Profile Design: 50mm height and 15° approach/departure angles allow vehicles to pass at speeds up to 15km/h without jolting, suitable for cars, SUVs, and light trucks.
High-Visibility Reflective Strip: 50mm-wide yellow reflective tape on the top surface enhances visibility in dim light, meeting EN 12899 standards for traffic ramps.
Easy Surface Mounting: Pre-drilled holes and included masonry screws secure the ramp to concrete or asphalt in minutes, with optional adhesive for temporary setups.
Smooth Transition Edges: Beveled edges prevent tire damage and reduce noise, providing a comfortable driving experience while controlling speeds.
Residential Driveways: Creates a gentle transition over drainage grates, utility trenches, or uneven pavement in home driveways, protecting both vehicles and pedestrians.
Parking Lot Entrances/Exits: Guides cars into slow zones at parking lot gates or ticket machines, reducing abrupt stops and improving traffic flow.
Commercial Loading Docks: Provides a safe ramp for forklifts and delivery trucks to navigate between different floor heights, minimizing cargo shifting during transport.
School and Campus Paths: Marks safe crossing points for pedestrians and cyclists, ensuring vehicles slow down in shared-use zones.
Q: Can this ramp be used as a speed hump?
A: No, it’s designed for smooth elevation changes (e.g., over cables or drains) rather than speed reduction; for speed control, consider our 120mm rubber speed hump.
Q: How does it perform in freezing temperatures?
A: The recycled rubber remains flexible down to -25°C, with no risk of cracking from ice expansion.
Q: Can it be cut to a shorter length?
A: Yes, use a hacksaw to trim the ramp to the desired length (minimum 300mm), with reflective tape available for custom-cut edges.
Q: Is it suitable for wheelchair accessibility?
A: Yes, the 15° slope and smooth surface meet ADA requirements for mobility devices, providing safe passage for all users.
The 500mm Rubber Speed Ramp with Yellow Reflective Part is a low-profile traffic calming solution designed to guide vehicles smoothly over obstacles or into parking bays while ensuring safety in low-speed environments. Constructed from recycled rubber with a 50mm height and yellow reflective top strip, this ramp reduces tripping hazards for pedestrians and protects vehicle suspension from sudden impacts. The 500mm length fits single lanes or narrow driveways, making it ideal for residential areas, parking lots, and commercial entrances.
Recycled Rubber Construction: Made from 80% post-consumer tire rubber, the ramp is eco-friendly, oil-resistant, and capable of withstanding 10-ton vehicle loads.
Low-Profile Design: 50mm height and 15° approach/departure angles allow vehicles to pass at speeds up to 15km/h without jolting, suitable for cars, SUVs, and light trucks.
High-Visibility Reflective Strip: 50mm-wide yellow reflective tape on the top surface enhances visibility in dim light, meeting EN 12899 standards for traffic ramps.
Easy Surface Mounting: Pre-drilled holes and included masonry screws secure the ramp to concrete or asphalt in minutes, with optional adhesive for temporary setups.
Smooth Transition Edges: Beveled edges prevent tire damage and reduce noise, providing a comfortable driving experience while controlling speeds.
Residential Driveways: Creates a gentle transition over drainage grates, utility trenches, or uneven pavement in home driveways, protecting both vehicles and pedestrians.
Parking Lot Entrances/Exits: Guides cars into slow zones at parking lot gates or ticket machines, reducing abrupt stops and improving traffic flow.
Commercial Loading Docks: Provides a safe ramp for forklifts and delivery trucks to navigate between different floor heights, minimizing cargo shifting during transport.
School and Campus Paths: Marks safe crossing points for pedestrians and cyclists, ensuring vehicles slow down in shared-use zones.
Q: Can this ramp be used as a speed hump?
A: No, it’s designed for smooth elevation changes (e.g., over cables or drains) rather than speed reduction; for speed control, consider our 120mm rubber speed hump.
Q: How does it perform in freezing temperatures?
A: The recycled rubber remains flexible down to -25°C, with no risk of cracking from ice expansion.
Q: Can it be cut to a shorter length?
A: Yes, use a hacksaw to trim the ramp to the desired length (minimum 300mm), with reflective tape available for custom-cut edges.
Q: Is it suitable for wheelchair accessibility?
A: Yes, the 15° slope and smooth surface meet ADA requirements for mobility devices, providing safe passage for all users.
