| Size: | |
|---|---|
| Weight: | |
| End cap size: | |
| End cap Weight: | |
| Quantity: | |
RX-JSD-5R-30A
RONGXIANG
The Commercial Trapezoidal Speed Hump with White Lines is a traffic calming solution designed to reduce vehicle speeds in areas with mixed pedestrian and motor vehicle traffic. Manufactured by RONGXIANG, this product carries CE, SGS, ISO, and ROHS certifications, meeting international safety standards for traffic infrastructure. It is intended for use in commercial procurement projects where traffic safety and compliance are primary considerations.
This speed hump features a trapezoidal profile that creates a gradual transition for vehicles, encouraging speed reduction without causing excessive jolting or noise. The design balances effective speed control with driver comfort, making it suitable for areas with regular vehicle traffic including delivery trucks and emergency vehicles.
The speed hump incorporates a 12° gradual slope on both approach and departure sides. This design allows vehicles to slow down smoothly, minimizing impact on suspension systems and reducing noise pollution compared to traditional rounded speed humps. The profile is optimized for vehicles traveling at speeds up to 30 km/h, promoting consistent speed compliance without requiring sudden braking.
Constructed from vulcanized rubber reinforced with internal steel inserts, this speed hump provides structural strength while maintaining flexibility. The rubber material absorbs impact energy, reducing wear on both vehicles and the road surface. The steel reinforcement enhances load-bearing capacity, supporting weights up to 20 tons.
Pre-applied reflective white lines are integrated into the top surface of the speed hump. These lines enhance visibility during low-light conditions, ensuring drivers can detect the hump from a distance. The reflective paint is formulated to resist weathering, though periodic reapplication is recommended for high-traffic locations.
The speed hump is available in modular sections that can be connected to create custom lengths. Standard configurations include 2.7m, 3.6m, and 4.5m lengths, suitable for single lanes or wider roadways. Installation can be completed using either bolt-down or adhesive methods on asphalt or concrete surfaces, with all necessary hardware included with each section.
These speed humps are commonly installed in neighborhoods, school zones, and park areas to reduce vehicle speeds and protect pedestrians, particularly children. They create a safer environment by discouraging speeding in areas with high foot traffic.
In shopping center parking lots, retail complexes, and loading zones, the speed humps help control vehicle speeds and improve safety for shoppers and employees. They also reduce the risk of collisions between vehicles and pedestrians in busy commercial areas.
For warehouse complexes, factory premises, and distribution centers, these speed humps provide effective traffic control in areas where heavy machinery and pedestrian traffic intersect. The 20-ton load capacity makes them suitable for use with delivery trucks and industrial vehicles.
Hospitals, university campuses, and government facilities benefit from the calm traffic flow created by these speed humps. They are particularly useful near entrances, pedestrian crossings, and areas with frequent ambulance or emergency vehicle access.
Component | Dimensions | Weight |
Middle Section | 500×1000×75mm per piece | 23 kg per piece |
End Cap | 250×1000×75mm per piece | 9 kg per piece |
Standard Lengths | 2.7m, 3.6m, 4.5m | - |
Maximum Load Capacity | 20 tons | - |
Recommended Speed | Up to 30 km/h | - |
Certifications | CE, SGS, ISO, ROHS | - |
The design is optimized for vehicles traveling at speeds up to 30 km/h. Drivers should reduce their speed to this level before crossing to ensure a smooth transition and avoid unnecessary vehicle wear.
Yes, the steel-reinforced rubber construction supports loads up to 20 tons, making it suitable for use with most commercial and emergency vehicles.
The reflective paint is weather-resistant, but reapplication every 1-2 years is recommended for high-traffic areas to maintain optimal visibility.
Yes, this product meets the requirements of international traffic calming standards including MUTCD in the United States and TSRGD in the United Kingdom for dimensions and safety features.
RONGXIANG offers a range of traffic safety solutions for commercial and industrial applications. For additional information about the Commercial Trapezoidal Speed Hump with White Lines or to request a quote for your project, please contact our team.
English
